Publications & Reports

LSU
Uhm, J., Acharya, S., Open-Loop Control of Combustion Instability with a High-Momentum Air Jet, Combustion and Flame, Vol. 142, No.4, 2005, pp. 348-363. Saha, A., Acharya, S., Prakash, C., and Bunker, R., Blade Tip Desensitization with Pressure Side Winglet, Intl. J. of Rotating Machinery, Vol. 2006, Article ID 17079, 15 pages. Price P, Guo, S.M., Hirschmann, M., 2004, Performance of an Evaporator for a LPG Powered Vehicle, Applied Thermal Engineering, Vol. 24, pp 1179–1194 Campos D., Allgood, D., Zhou, K., and Acharya, S., “Active Control of Combustion Instabilities Using Model-Based Controllers,” Combustion Science & Technology, Vol. 175, 2003, pp. 27-53 Morris, T. E., Murphy, M. C. M., Acharya, S., “Metal Micro-fuel-injector Fabricated by LIGA,” SPIE’s 2000 Symposium on Micromachining and Microfabrication, 18-20 September, Santa Clara, CA. Despa, M., Kelly, K., Collier, J., “Injection Molding of Polymeric LIGA HARMS,” Microsystems Technology, Vol. 6, 1999, pp. 60-66 S. Acharya, V. Eliades, and D. E. Nikitopoulos, “Heat Transfer Enhancements in Rotating Two-Pass Coolant Channels with Profiled Ribs: Average Results,” ASME Journal of Turbomachinery, Vol. 123, 2001, pp. 97-106 Chen, Y., Nikitopoulos, D., Hibbs, R., Acharya, S., and Myrum, T., "Detailed Heat/Mass Transfer Distribution in a Ribbed Coolant Passage," International Journal of Heat and Mass Transfer, Vol. 43, 2000, pp. 1479-1492.

LSU

Uhm, J., Acharya, S., Open-Loop Control of Combustion Instability with a High-Momentum Air Jet, Combustion and Flame, Vol. 142, No.4, 2005, pp. 348-363.

Saha, A., Acharya, S., Prakash, C., and Bunker, R., Blade Tip Desensitization with Pressure Side Winglet, Intl. J. of Rotating Machinery, Vol. 2006, Article ID 17079, 15 pages.

Price P, Guo, S.M., Hirschmann, M., 2004, Performance of an Evaporator for a LPG Powered Vehicle, Applied Thermal Engineering, Vol. 24, pp 1179–1194

Campos D., Allgood, D., Zhou, K., and Acharya, S., “Active Control of Combustion Instabilities Using Model-Based Controllers,” Combustion Science & Technology, Vol. 175, 2003, pp. 27-53

Morris, T. E., Murphy, M. C. M., Acharya, S., “Metal Micro-fuel-injector Fabricated by LIGA,” SPIE’s 2000 Symposium on Micromachining and Microfabrication, 18-20 September, Santa Clara, CA.

Despa, M., Kelly, K., Collier, J., “Injection Molding of Polymeric LIGA HARMS,” Microsystems Technology, Vol. 6, 1999, pp. 60-66

S. Acharya, V. Eliades, and D. E. Nikitopoulos, “Heat Transfer Enhancements in Rotating Two-Pass Coolant Channels with Profiled Ribs: Average Results,” ASME Journal of Turbomachinery, Vol. 123, 2001, pp. 97-106

Chen, Y., Nikitopoulos, D., Hibbs, R., Acharya, S., and Myrum, T., "Detailed Heat/Mass Transfer Distribution in a Ribbed Coolant Passage," International Journal of Heat and Mass Transfer, Vol. 43, 2000, pp. 1479-1492.

NSU
Fuel Alcohol Production From Post-Harvest Sugarcane Residue

TU
The Potential Use of Lignite and Petcoke for Louisiana Electric Power Generation Rev. 1 Liquefied Natural Gas (LNG) Imports and Their Impact on the State, Regional, and National Economy Aspen Plus Modeling of the Three-Reaction Version of the Copper-Chloride Thermochemical Cycle for Hydrogen Production From Water Analysis of the Copper Sulfate Cycle for the Thermochemical Splitting of Water for Hydrogen Production

The Potential Use of Lignite and Petcoke for Louisiana Electric Power Generation Rev. 1

Liquefied Natural Gas (LNG) Imports and Their Impact on the State, Regional, and National Economy

Aspen Plus Modeling of the Three-Reaction Version of the Copper-Chloride Thermochemical Cycle for Hydrogen Production From Water

Analysis of the Copper Sulfate Cycle for the Thermochemical Splitting of Water for Hydrogen Production